Harbor Freight - Ultrasonic Cleaner

Here you can discuss everything you do to keep your car running 100%.
Post Reply
Posts: 25
Joined: Fri Apr 16, 2010 2:07 pm
Drift Chassis: TA-05VDF G; TA-05v.2 IFS;
Location: SoCal, SFV

Harbor Freight - Ultrasonic Cleaner

Post by nickvig » Tue Apr 20, 2010 7:02 pm

I recently helped a buddy do a thorough dis-assembly / clean / re-assembly of a used chassis he bought. I've always had a tough time cleaning bearings, even using the RPM bearing blaster with motor spray. So I went over to Harbor Freight and found this:

http://www.harborfreight.com/cpi/ctaf/d ... umber=3305

Throw some water in the unit, throw your bearings in there and watch the dirt and grime literally wash away. I re-oiled all the bearings with some Epic bearing oil and they were like brand new. If a whole bearing set after market is $30, and you buy this for $25 and your bearings three times a year, you've saved yourself some $$ over purchasing new bearings. It also worked well to clean the dirt off of cvd internals and dogbones themselves. Just make sure you re-oil or re-grease everything accordingly after cleaning.

They also have a battery operated unit, but I can't say how well it works. Also, it's only available via internet according to the guy in the HF store.

http://www.harborfreight.com/cpi/ctaf/d ... mber=66218

Just thought I'd share.

Site Mod
Site Mod
Posts: 120
Joined: Wed Jan 06, 2010 1:17 am
Drift Chassis: Yokomo Driftmaster
Location: Cerritos, CA

Re: Harbor Freight - Ultrasonic Cleaner

Post by sangstahdorifuto » Wed Apr 21, 2010 3:11 am

nice nick great find!

Post Reply