at our reunion event last July 2010
TA03R 1.7 going head to head with a non-CS
11 posts
• Page 1 of 1
TA03R 1.7 going head to head with a non-CS
by dencio1976 » Tue Oct 26, 2010 11:08 pm
at our reunion event last July 2010
- dencio1976
- Rally Style Drifting
- Posts: 97
- Joined: Wed Feb 10, 2010 8:03 am
- Location: Manila, Philippines
- Drift Chassis: Tamiya 414M/TA03R
Re: TA03R 1.7 going head to head with a non-CS
by Z-HiDE » Wed Oct 27, 2010 2:29 am
Hella sick steering!!
<Student On A Budget>
[HP : 83448625]~[E-Mail : some-01-kid@hotmail.com]
|Cyclone TC-S 1.78CS|Nosram 7.5R|ZTW 60A|
|MR 4TC-SD CM 1.5CS|Team Powers 10.5R|Novak XBR 120A|
|Sparrowhawk DX|MOTOR|ESC|
[HP : 83448625]~[E-Mail : some-01-kid@hotmail.com]
|Cyclone TC-S 1.78CS|Nosram 7.5R|ZTW 60A|
|MR 4TC-SD CM 1.5CS|Team Powers 10.5R|Novak XBR 120A|
|Sparrowhawk DX|MOTOR|ESC|
- Z-HiDE
- Still Turns In
- Posts: 214
- Joined: Mon Feb 22, 2010 10:08 am
- Location: Singapore
- Drift Chassis: MR4TC-SD, Cyclone TC
Re: TA03R 1.7 going head to head with a non-CS
by Calzone » Wed Oct 27, 2010 4:40 am
Holy crap, how did you get that crazy lock o.0
- Calzone
- Still Turns In
- Posts: 324
- Joined: Sat Jan 30, 2010 6:29 am
- Location: The Netherlands
- Drift Chassis: TA05ERxCCCS
Re: TA03R 1.7 going head to head with a non-CS
by Lord » Wed Oct 27, 2010 9:35 am
And what shafts are you using on the front ? 
- Lord
- Rally Style Drifting
- Posts: 58
- Joined: Wed Aug 04, 2010 12:02 pm
- Location: Warsaw, Poland
- Drift Chassis: Tamiya TA-05 CS
Re: TA03R 1.7 going head to head with a non-CS
by RC_Drifter » Wed Oct 27, 2010 1:20 pm
IMO it's only rwd, without shafts on front. But if there are shafts I'M DEAD 
HPI E10 Brushless >>>>>MY DRIFT VIDEO<<<<<
RC Drift Podlasie --> http://www.rcdriftpodlasie.pun.pl
5200KV 6,5T -- ESC 100A -- Turnigy Lipo 5.0 -- Accucel 6 -- Hachiroku
RC Drift Podlasie --> http://www.rcdriftpodlasie.pun.pl
5200KV 6,5T -- ESC 100A -- Turnigy Lipo 5.0 -- Accucel 6 -- Hachiroku
-
RC_Drifter - What's CS?
- Posts: 16
- Joined: Wed Sep 01, 2010 2:51 am
- Location: Poland
- Drift Chassis: E10 Brushless
Re: TA03R 1.7 going head to head with a non-CS
by dencio1976 » Wed Oct 27, 2010 9:34 pm
it's a shaved TA03 universal. i get a full lock angle of 51 degrees by eye using a protractor. 
the c-hubs limit the lock but i can get a greater lock angle to 55 (physical limit of the modded universals) but will probably get a hell of a chatter.
there's no way a RWD CS can hope to catch up with a non-CS.
the c-hubs limit the lock but i can get a greater lock angle to 55 (physical limit of the modded universals) but will probably get a hell of a chatter.
there's no way a RWD CS can hope to catch up with a non-CS.
- dencio1976
- Rally Style Drifting
- Posts: 97
- Joined: Wed Feb 10, 2010 8:03 am
- Location: Manila, Philippines
- Drift Chassis: Tamiya 414M/TA03R
Re: TA03R 1.7 going head to head with a non-CS
by Calzone » Sat Nov 06, 2010 9:04 am
Could you post pics of your modded universals? Would like to know how much you shaved off 
- Calzone
- Still Turns In
- Posts: 324
- Joined: Sat Jan 30, 2010 6:29 am
- Location: The Netherlands
- Drift Chassis: TA05ERxCCCS
Re: TA03R 1.7 going head to head with a non-CS
by dencio1976 » Mon Nov 15, 2010 7:50 am
sorry for the late reply.
the shaved TA03 universals are at the top
414M modded CVD - middle
414M stock CVD - bottom
yes those are the maximum angles it can take when it runs. they can bend further but that's for allowance.
- dencio1976
- Rally Style Drifting
- Posts: 97
- Joined: Wed Feb 10, 2010 8:03 am
- Location: Manila, Philippines
- Drift Chassis: Tamiya 414M/TA03R
Re: TA03R 1.7 going head to head with a non-CS
by AutoPilot » Mon Nov 15, 2010 2:18 pm
do they wear a lot?
Yok DP 1.8, Yok DRB 1.8
-
AutoPilot - What's CS?
- Posts: 9
- Joined: Tue Jun 15, 2010 6:47 am
- Location: Saint-Petersburg, Russia
- Drift Chassis: Yokomo DP
Re: TA03R 1.7 going head to head with a non-CS
by dencio1976 » Wed Nov 17, 2010 7:01 pm
since it's mostly just front assist on CS setups, wear is not really there.
in reality, only the aluminum part is shaved off. nothing of the steel part is shaved so reliability is no problem.
in reality, only the aluminum part is shaved off. nothing of the steel part is shaved so reliability is no problem.
- dencio1976
- Rally Style Drifting
- Posts: 97
- Joined: Wed Feb 10, 2010 8:03 am
- Location: Manila, Philippines
- Drift Chassis: Tamiya 414M/TA03R
Re: TA03R 1.7 going head to head with a non-CS
by dcalcada » Fri Aug 10, 2012 8:21 pm
I don't get it how you reach that angle? Where did you shave? Please help me
Best regards,
Diogo Calçada
Best regards,
Diogo Calçada
- dcalcada
- What's CS?
- Posts: 6
- Joined: Sat Apr 28, 2012 9:17 pm
- Location: Portugal
- Drift Chassis: TA03 R TRF & Sakura Zero
11 posts
• Page 1 of 1
Return to Counter-Steer Action Pictures.
Who is online
Users browsing this forum: No registered users and 1 guest